Stretch Hooder for varying types of load
The hooder requires no compressed air, it does not use hydraulics, it is therefore purely electro mechanical in operation. The machine is classed as a ‘Flex’ as it can handle varying types of pallet and dimension being able to self adjust at random as the loads can be tracked. The load height is measured by means of an ultra sonic sensor, the hood length is then determined and the seal made at low level. The hood is then transported to hig level between 2 belts and fed into the centre of the machine to be opened by vacuum cups. Once partially opened, there are mechanical fingers which physically open the hood into a rectangle. Then the stretching arms move in and pinch the film and start to roll the hood down to a rope. Then the fingers pull out all at the same time and the hood is stretched open and then rolled down the load in a controlled manner. We are able to create up to 15% downward stretch with a combination of the feed roller speed and carriage descent speed working together. The machine can use coloured film with UV inhibitors and these days with 30% recycled film, which means that customers can avoid paying waste taxation.
Fully motor driven
so no gas, hydraulics or pneumatics
High capacity
up to 100 pallets
per hour
Reducing filmconsumption
by applying vertical tension
Fully water and dust proof
packaged pallets
Extra pallet stability
due to horizontal
and vertical stretch
100% recyclable
and sustainable
packaging film
Modular and
compact machine design
Runs film with high
percentages of
recycled material
(up to 30%)
Freestanding
operating panel
with graphical interface
