Atecmaa GX2.52 Programmable Semi Auto Turntable Stretch Wrapping Machine
The Atecmaa GX2.52 Programmable Semi-Automatic Turntable Stretch Wrapping Machine is a versatile solution for wrapping a variety of loads, from lightweight to heavy-duty pallets. Featuring a multi-programme and automatic cycle, it offers exceptional wrapping quality, including for unsteady loads.
With a maximum load capacity of 1500 kg and a wrapping height of up to 2400mm, the GX2.52 is equipped with a user-friendly touchscreen control panel and can be remotely installed for ease of use. Its electromagnetic brake ensures precise film tension, while the automatic height detection system provides seamless operation.
The machine supports up to 12 programmable wrapping cycles, allowing you to adjust settings such as film stretching, overlap, and turntable speed. Ideal for high-volume operations, it delivers efficiency, flexibility, and superior quality in pallet wrapping.
- Manual top sheet mode
- Height of the pallet: up to 2400 mm (standard machine)
- Automatic detection of the height of the pallet
- Progressive start of the turntable
- Electromagnetic brake (patent pending)
- 20 to 200 pallets/day
- 9 multi programmes
- Embedding belt, weigh integrated scale within the wrapping: Optional
– Installed power: 1.4 KW
– Power: 230V Single phase 50hz + earth
– Manufacture: IP54
Dimensions: – Length : 2565 mm / 2615 mm*
– Width: 1976 mm / 2026 mm*
– Overall height: 2900 mm / 3400 mm*
– Weight: 480 Kg (or 550 kg*)
Accepted dimensions of the pallets: – Length: 1200 mm
– Width: 800 or 1000 mm (or 1200 mm*)
– Height: 2400 (or 2900 mm**)
– Maximum load: 1500 Kg
– Column: folded sheet metal made. -Maximum pallet +
load wrapping height: 2572 mm or 3072 mm**
– bobbin carriage powered by a motor-reducer with a frequency converter, drive with pitch chain.
2 speeds: one wrapping up, one wrapping down, independant from each other during the cycle
Detectors to stop at the top and the bottom
Cell for automatic detection of the height of the pallet
Safety device at the bottom of the bobbin rail, no risk for the operator of being crushed
Tension control system to ensure a uniform film application force right round the palletized load
Electronically controlled gripping force by a patented electromagnetic roll brake, according to 5 different instructions during the wrap
ping cycle
Detection and indication of film breakage or end of roll
– Lowered slung turntable, protected by a peripheral belt
Contact Form
Frequently Asked Questions
Teams that need a semi-auto wrapper with programmable recipes for a mix of light, awkward or heavy pallets.
You can save multi-programme cycles (up to 12 depending on configuration), adjusting film stretch, overlaps, up/down speeds and turntable speed.
Yes — the carriage has independent up/down speeds, so you can tighten at the base/top and go lighter in the middle.
A tension control system and electromagnetic brake keep film force uniform around the load to reduce lean and crush risk.
The machine can detect film break/end-of-roll and indicate it to the operator so you can reload and resume quickly.
Yes — there’s a manual top-sheet mode you can include within your wrap pattern for dust/moisture mitigation.
Up to 12 programmable cycles (some setups expose 9 presets); naming/recall is via the touchscreen HMI.
Yes — the model supports remote commissioning/support so basic set-up can be completed without a site visit where suitable.
Typical use is 20–200 pallets/day, subject to film grade, pattern and pallet variation.
Up to 1500 kg and 2400 mm wrap height as standard (to 2900 mm with the tall-column option); pallet footprint 1200 × 800/1000 mm (up to 1200 mm width optional).
A motor-reducer carriage with frequency converter drives pre-stretch; you control stretch % and overlap at programme level.
Yes — progressive turntable start and a controlled slow-down to an indexed stop.
A safety device at the bobbin rail base (anti-crush), guarded design, and top/bottom stop detectors.
Ramp or embedding belt, integrated weighing scale, and tall column/large turntable options.
230 V single phase, 50 Hz + earth, 1.4 kW, IP54 manufacture.