Automatic Case / Tray Erectors
*Stainless Steel Main Frame
*Stainless Steel Bucket Conveyors
*NEMA 12 Control Panel
*208 – 575 volts – 3 phase, 50 or 60 hz.
*Pneumatic controls require 65-70 p.s.i. (5 bars) @ 10 c.f.m.
*Self-Monitoring Diagnostics
Enquire Now
Frequently Asked Questions
It forms flat blanks into cases or trays, squares them and presents them for packing or sealing—removing manual folding and speeding up upstream lines.
Yes — with the right tooling, programmes and magazine set-ups, a single platform can switch between RSC cases and tray styles.
The main frame and bucket conveyors are stainless steel, giving durability and easy cleaning in production environments.
The control panel is NEMA 12, suitable for industrial areas with dust, lint and light drips.
It supports 208–575 V, three-phase, 50/60 Hz, making it straightforward to integrate across UK/EU and international sites.
Typical requirement is 65–70 psi (≈5 bar) at ~10 cfm, used for pneumatic actuations within the forming cycle.
Yes — self-monitoring diagnostics help operators pinpoint jams, empty magazines and sensor faults quickly.
A blank magazine indexes sheets to the forming section, where pick-off devices and buckets manage forming and transfer.
Yes — within spec, the erector can be tuned for board stiffness and coatings; change parts and vacuum settings optimise handling.
Use saved recipes for size and style; guides, buckets and vacuum cups are adjusted or swapped as specified for the format.
Yes — the outfeed is designed to hand off to case packers, top/bottom sealers or manual packing stations.
Interlocked guards, category-rated E-Stops and trapped-key access (where specified) support safe operation and maintenance.
Throughput is application-dependent (blank size, tray/case style and board grade); your line study will determine the achievable CPM.
Yes — Phoenix Handling Solutions provides UK-wide support, preventive maintenance and spare parts.